Air Tools
Air tools are your best bet for maximizing productivity. A staple gun and brad nailer are two common tools of the trade that can be run by air.
It may be advisable to house your air compressor on the outside in a specially built house to minimize noise in the workshop.
You can use multiple air tools by using fittings as shown to take air hoses to more than one work station using the same air compressor.
Remember that air tools require pneumatic oil for long life. Drop a few drops in the air nozzle as shown. Too much oil can splatter on fabric, so shoot test staples after each oiling.
Air tools often require a specific amount of air pressure to work. Find out about the specific air pressure requirements for your specific model of air tool. A gauge on your air compressor will tell you how much air is being stored in the tank. There is also a knob to raise or lower air pressure capacity on the air compressor itself. (Check manufactures instructors for your particular model)
The air compressor tank will collect water from the atmosphere, so it is important to drain your air compressor daily. Be certain to allow for easy access to the drain valve. When not in use, turn off the air compressor. If a air hose should break, the air compressor would run continuously, causing a fire hazard from overheating.
